|
|
|
  Testing EquipmentBT611 EPIRB Tester
The apparatus BT611 allows the user not only to execute the final examination independently, but also to make the comparative estimation of parameters of different EPIRB models. At use BT611 the user must only connect it to the computer.
The current information within the choice of an operator appears as data on a display in a table or a graphic form:
1. Representing behaviour of phase in send.
2. Graph of information about power and frequency value.
3. Graph of phase deviation and time of increase and decrease.
4. Graphs of parameters of frequency instability.
5. Generalized table of parameters for all time of monitoring.
6. Table of report maintenance with pointing of bits numbers of the informative fields of
any user protocol.
An information message and result of code BCH control is in every protocol. In protocols 1…4 the current values of other message parameters additionally appear on the screen. All protocols are saved in RAM or, it's up to an operator, on hard or floppy disks and can be printed.
Control of efficiency and metrological descriptions are made with the help of a special signal as a short message. Setting accuracy of its parameters is determined by an error of the supporting generator and considerably exceeds required values of error. The work with the EPIRB can be held both through a cable and through a control antenna, included in product set.
Metrological descriptions of good (error):
Automatical tester of accumulator battery BT-711
 Automatical tester of accumulator battery BT-711 is assigned for determination of the leaden-acid accumulator battery actual capacity. The battery capacity is determined by the method of discharging the previously charged battery through the built-in-tester demand.
The operator needs only to push the button «ПУСК» for the beginning of measuring. The procedure ends up automatically. When the discharge ends the significance measuring capacity of an accumulator appears on the display. The button «СТОП» is used in case of necessity of the measuring procedure sudden stop.
Basic features:
The device meets the requirements of SOLAS IV/13.6.2 of the accumulator battery remaining capacity measurement procedure.
Technical parameters:
|
ServicesProductsSatellite EquipmentGMDSS equipmentSafety equipmentNavigation equipmentSSAS/LRITFISHFINDING EQUIPMENTTesting equipmentPartnersRecognition Certificates Certificates of Appointment News"Professor Vodyanitsky" is afloat again URANIS LTD has succesfully completed the navigation and satcom equipment replacement on the scientific vessel "Professor Vodyanitsky" this year. In the beginning of July the vessel has safely begun her first voyage after a long break. The new purchase order for safety equipmentABG Shipyard (India) has placed an order with URANIS for 6 sets of safety equipment to be delivered until August 2010 for a series of new ships ordered by European customer. All the EPIRBs will be pre-programmed and installed onboard by Ultra Marine Ltd, URANIS' new representative in India. Ultra Marine have several offices around India with their HQ in Mumbai.
The certificates of type approval for the new EPIRB are receivedThe certificates of type approval for the new EPIRB are received
Our branches: |
Ukraine, 99053, Sevastopol
Vakulenchuka st. 29
E-mail: info@uranis.net | Tel.: +38 0692 470923 Fax: +38 0692 470922
© URANIS 2010. Sitemap
E-mail: info@uranis.net | Tel.: +38 0692 470923 Fax: +38 0692 470922
© URANIS 2010. Sitemap